Data Domain DD400 Series - Autosupport Reports; Add to the Email List; Remove from the Email List

Login and Configuration
36 DD400 Series Restorer User Guide
Enter the WINS server for the restorer to use:
WINS Server
Enter the IP address for the WINS server for this system
[]:
Enter one or more backup servers as restorer clients.
Backup Servers
Enter the Backup Server list (CIFS clients of /backup)
[]:
The Domain method brings the following prompts. Enter a domain name, the name of a
CIFS backup account and optionally, one or more domain controller IP addresses, a WINS
server name, and backup server names. Press Enter with no entry to break out of the
prompts for domain controllers.
Domain Name
Enter the name of the Windows domain for this system
[ ]:
Do you want to add a backup user? (yes|no) [no]:
Backup user
Enter backup user name:
Domain Controller
Enter the IP address of domain controller 1 for this
system
[ ]:
Enter the WINS server for the restorer to use:
WINS Server
Enter the IP address for the WINS server for this system
[]:
Enter one or more backup servers as restorer clients.
Backup Servers
Enter the Backup Server list (CIFS clients of /backup)
[]:
The Active-Directory method brings the following prompts. Enter a fully-qualified realm
name, the name of a CIFS backup account, a WINS server name, and backup server
names. Data Domain
recommends not specifying a domain controller. When not
specifying a domain controller, be sure to specify a WINS server. The
restorer must meet
all active-directory requirements, such as a clock time that is no more than five minutes
different than the domain controller.
Press Enter with no entry to break out of the prompts
for domain controllers.