To Next Page
J
Joshua BooneSep 2, 2025
What to do if the DataCard Printer test card does not print?
- AAriel VelasquezSep 2, 2025
Request service for the printer.
What to do if the DataCard Printer test card does not print?
Request service for the printer.
What to do if the DataCard Printer powers on but does not display 'Ready'?
Request service for the printer.
Why my DataCard CD800 Printer does not power on?
If the power source is not functioning, replace it and then begin with printing a test card. If the power source is functioning, request service for the printer.
What to do if the data cable of DataCard CD800 Printer is damaged or frayed?
Power off the printer. Replace the cable if you have a spare. Contact your service provider to order a new data cable.
Why does my DataCard Printer have a temporary communication problem?
Check for the following: USB extension cables can cause communication problems. The recommended USB cable is 6-ft. (2 meters) long. Make sure that the cable is rated for USB 2.0 data transmission. If you are using a USB hub, a self-powered hub is recommended.
What to do if the network cable of DataCard CD800 is loose?
Reconnect the data cable to the network port and the printer. Restart the printer.
How to configure the correct network address for DataCard CD800?
Ensure that the server name or IP address is entered in the Port Settings or Configure Port dialog box on the computer.
Lists compatible operating systems for the printer driver.
Explains the main functions performed by the printer driver after installation.
Provides a step-by-step summary of the basic driver installation process.
Helps users determine necessary information for installing and using the driver.
Details the initial steps to launch and begin the driver installation process.
Step-by-step guide for installing the driver via USB or network connection.
Introduces the Printer Properties window for managing printer settings and information.
Guides on how to remove the printer driver from the system.
Details how to set default printing preferences for card designs.
Guides on setting up the printer and driver for rewritable card printing.
Addresses common issues that prevent successful driver installation.
Solves problems encountered during USB-based printer driver installation.
General| Print Resolution | 300 dpi |
|---|---|
| Weight | 12 lbs (5.4 kg) |
| Power Requirements | 100-240 VAC, 50/60 Hz |
| Print Technology | Dye-sublimation |
| Card Capacity | 100 cards (standard hopper) |
| Connectivity | USB |
| Card Size | CR80 (85.6 mm x 54 mm) |
| Operating System Compatibility | Windows |
| Card Thickness | 0.020" - 0.040" (0.51 mm - 1.02 mm) |
