DataCard SD260 User Guide

104 Card Design Tasks
Print Blocking Syntax
The syntax or structure of each print blocking escape is ~XX%n1n2n3n4?, where:
Print Blocking in a Direct-to-Card Printer
The following examples show how to determine the values for the block print escape.
~ The beginning of the escape.
XX The type of action:
 PB—Print Block
 TA—Topcoat Add
 TR—Topcoat Remove
% The start of values.
n1 The distance (in mm) from the top of the card to the start of the print blocking
area.
n2 The distance (in mm) from the left edge of the card to the start of the print
blocking area.
n3 The width (in mm) of the print blocking area.
n4 The height (in mm) of the print blocking area.
? The end of the escape.
 The dimensions shown in the following examples are for general reference. The
size, shape, and location of the magnetic stripe, smart card chip, or signature
panel can vary based on the card stock you use. Test your escapes to make sure
that the blocking areas are correct.
 Blocking typically extends 0.05 inch (1.27 mm) outside the edges of a feature. The
diagrams and dimensions shown include the extended blocking region.

DataCard SD260 Specifications

General

Windows operating systems supported	Windows 7 Enterprise, Windows 7 Enterprise x64, Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 8, Windows 8 Enterprise, Windows 8 Enterprise x64, Windows 8 Pro, Windows 8 Pro x64, Windows 8 x64
Color	Yes
Print speed (color)	200 card/h
Product color	Blue, Grey

Weight and Dimensions

Depth	391 mm
Width	175 mm
Height	224 mm