DataCard SD360 - Monochrome Print Ribbon Kits; Ribbon Saver

90 Supplies and Parts
Monochrome Print Ribbon Kits
The following monochrome print ribbon kits are available:
 Alternating black and topcoat panels (KT ribbon), 1000 images per roll
 Black with two topcoat panels (KTT ribbon), 750 images per roll
The printer applies black and two topcoat panels on the same
side of the card.
 Continuous black (K ribbon), up to 500 images per roll
 Continuous black (K ribbon), up to 1500 images per roll
 Continuous dark blue, up to 1500 images per roll
 Continuous white, up to 1500 images per roll
 Continuous red, up to 1500 images per roll
 Continuous green, up to 1500 images per roll
 Continuous silver, up to 1500 images per roll
 Continuous gold, up to 1500 images per roll
 Continuous silver metallic, up to 1500 images per roll
 Continuous gold metallic, up to 1500 images per roll
 Continuous scratch-off, up to 1500 images per roll
Ribbon Saver
A roll of Datacard-certified monochrome ribbon enables the Ribbon Saver feature in the printer.
Ribbon Saver can increase the number of cards printed with each roll of ribbon because only the
printed portion of the ribbon is used. Excess ribbon is not advanced, reducing waste.
The KTT ribbon type is not supported in OpenCard-enabled systems. It uses only
one T panel, instead of both.
KT Ribbon
KTT Ribbon