SD260L/SD360/SD460 Installation and Administrator’s Guide 97
Card Storage
These guidelines apply to both printed and unprinted cards.
Cards must be stacked so that they do not shift and rub against each other.
When you store cards, make sure that no two cards contain images or blocks of color that
come in contact with each other.
Make sure that the magnetic stripe on one card does not come in contact with the magnetic
stripe on another card.
Make sure that cards with magnetic stripes are stored away from magnets and other
magnetic objects.
Store cards in a cool, dry, and dark place. Excessive light can cause yellowing of cards on
exposed edges.
Keep cards in their original packaging.
Cards must be at room temperature when they are used. If cards are stored in a cooler
environment than the printer, allow them to reach room temperature before you use them.
Cleaning Supplies
The print ribbon kit includes a cleaning card and a replaceable cleaning sleeve. For best results,
keep additional cleaning supplies on hand.
The following additional cleaning supplies are available:
Supply Description
Printer cleaning cards Pack of 10 double-sided, isopropanol-coated cleaning cards
used to clean the printer card track and transport rollers.
Cleaning sleeves Pack of 5 replaceable, adhesive-coated cleaning sleeves.
Cleaning swabs Pack of 5 isopropanol-saturated cleaning swabs for cleaning
debris and dust from the printhead and from hard-to-reach
internal areas of the printer.
Laminator cleaning cards Pack of 10 double-sided, sticky cleaning cards used to clean
the laminator when a holographic overlay is installed.
To Next Page
Loading...
