EasyManuals Logo

DataCard SD360 Installation And Administrator's Guide

DataCard SD360
130 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
SD260L/SD360/SD460 Installation and Administrator’s Guide 11
Install the 200-Card Input Hopper
The standard input hopper can hold about 100 0.030 in. (0.762 mm) cards. The printers can be
upgraded to use a 200-card input hopper.
The 200-card input hopper kit includes the larger hopper with an attached cover. The standard
hopper can be removed, and the 200-card hopper can be installed, without using tools. You also
can refer to the instructions shipped with the 200-card input hopper kit.
1. Open the input hopper.
2. Press the release tab located on the
back wall of the hopper while lifting
the hopper up and off the printer.
3. Install the 200-card input hopper by
aligning the tabs with the slots on
the printer.
4. Push the hopper down until it clicks
into place.
5. Load up to 200 cards in the hopper
and close the hopper cover. The
printer is ready to print cards.
Hopper Release Tab

Table of Contents

Other manuals for DataCard SD360

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DataCard SD360 and is the answer not in the manual?

DataCard SD360 Specifications

General IconGeneral
Card size85.6 x 53.98 mm
Card typesMagnetic stripe (ISO 7811), PVC
Card feederYes
Print technologyDye-sublimation
Maximum resolution300 x 300 DPI
Print speed (color)200 card/h
Print speed (monochrome)830 card/h
Duplex print speed (color)155 card/h
DisplayLCD
LaminationNo
CertificationcULus, FCC, I.C, CE, Ctick, VCCI, RoHS, WEEE, ENERGY STAR, CCC
Product colorBlack, Blue
Internal memory128 MB
Built-in barcodes1D, 2D
Cable lock slot typeKensington
Total input capacity100 sheets
Compatible operating systemsWindows Server 2003/Server 2008
Windows operating systems supportedWindows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64
Storage temperature (T-T)-15 - 60 °C
Operating temperature (T-T)15 - 35 °C
Storage relative humidity (H-H)10 - 90 %
Operating relative humidity (H-H)20 - 80 %
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
InterfaceUSB & Ethernet
Weight and Dimensions IconWeight and Dimensions
Weight5400 g
Dimensions (WxDxH)175 x 539 x 224 mm

Related product manuals