DataCard SD360 Installation And Administrator's Guide

SD260L/SD360/SD460 Installation and Administrator’s Guide 59
 KPower—Modify the print intensity for K (single-color) panel or K (single-color) ribbon.
 Increase the value to make single-color printing thicker and more defined on the card.
 Decrease the value for crisp bar codes or to prevent frequent ribbon breaks when
printing with the K panel.
 KPower1200DPI—Modify the print intensity at 1200 dpi for the K panel or K ribbon.
 Increase the value to make single-color printing thicker and more defined on the card.
 Decrease the value for crisp bar codes or to prevent frequent ribbon breaks when
printing with the K panel.
 KPower600DPI—Modify the print intensity at 600 dpi for the K panel or K ribbon.
 Increase the value to make single-color printing thicker and more defined on the card.
 Decrease the value for crisp bar codes or to prevent frequent ribbon breaks when
printing with the K panel.
 KPowerDuplex—Modify the print intensity for the back-side K panel and K ribbons.
 Increase the value to make single-color printing thicker and more defined on the card.
 Decrease the value for crisp bar codes or to prevent frequent ribbon breaks when
printing with the K panel.
 KWhiteShade—Modify the amount of power applied to the printhead to reduce ribbon
friction without transferring material. Decrease the value if material transfers to the card
when it should not.
 LeadTrim—Modify the number of millimeters to remove from the leading edge of a full-size
image to keep it within the print area (1 mm = 0.0394 in. or about 11.8 dot rows).
 SettingsGroupPurpose—State the purpose of a settings group. Group names are not
changeable. Use this option to identify the reason for creating a settings group.
 TPower—Modify the intensity of the T (topcoat) ribbon panel.
 Increase the value to make printed topcoat thicker or more uniform.
 Decrease the value to prevent frequent ribbon breaks while printing the topcoat.
 TPowerDuplex—Modify the intensity of the back-side T (topcoat) ribbon panel.
 Increase the value to make printed topcoat thicker or more uniform.
 Decrease the value to prevent ribbon breaks while printing the topcoat.

DataCard SD360 Specifications

General

Card size	85.6 x 53.98 mm
Card types	Magnetic stripe (ISO 7811), PVC
Card feeder	Yes
Print technology	Dye-sublimation
Maximum resolution	300 x 300 DPI
Print speed (color)	200 card/h
Print speed (monochrome)	830 card/h
Duplex print speed (color)	155 card/h
Display	LCD
Lamination	No
Certification	cULus, FCC, I.C, CE, Ctick, VCCI, RoHS, WEEE, ENERGY STAR, CCC
Product color	Black, Blue
Internal memory	128 MB
Built-in barcodes	1D, 2D
Cable lock slot type	Kensington
Total input capacity	100 sheets
Compatible operating systems	Windows Server 2003/Server 2008
Windows operating systems supported	Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64
Storage temperature (T-T)	-15 - 60 °C
Operating temperature (T-T)	15 - 35 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 80 %
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Interface	USB & Ethernet

Weight and Dimensions

Weight	5400 g
Dimensions (WxDxH)	175 x 539 x 224 mm