DataCard SR200 User Manual

SR200 & SR300 Card Printers and LM200 & LM300 Laminators Users Guide A-11
10000302 Unabletoestablishcommunication
withthenoncontactICencoder.
Contactyourserviceprovider.
10000303 Anerrorhasoccurredduringnon‐
contactICencodingdatawriting.
Verifythatthecardspecificationsarecorrect.
10000401 Userprogramisnotfound. Contactyourserviceproviderorapplication
provider.
10000403 Anerrorisreturnedfortheuser
program.
Contact
yourserviceproviderorapplication
provider.
10000501 Magneticencodingprogramisnot
found.
Contactyourserviceproviderorapplication
provider.
10000503 Anerrorhasoccurredduring
magneticencodingdatawriting.
Verifythatthecardspecificationsarecorrect.
10000504 Anerrorhasoccurredduring
magneticencodingdatareading.
Verifythatthecardspecificationsarecorrect.
10000505 Amagneticencodingcommand
errorhasoccurred.
Contactyourserviceprovider.
10000601 Endnotificationprogramisnot
found.
Contactyourserviceproviderorapplication
provider.
10000603 Anerrorisreturnedfortheend
notificationprogram.
Contactyourserviceproviderorapplication
provider.
10001001 Inkribboncannotberecognized. Makesurethattheprinterdriver’sinksetting
matchesthe
installedinkribbon.
10001002 Inkribbonspecificationisincorrect. Makesurethattheprinterdriver’sinksetting
matchestheinstalledinkribbon.
10001003 ICencoderisnotinstalled. —
10001004 Magneticencoderisnotinstalled. —
ErrorCode DisplayedMessage Solution

DataCard SR200 Specifications

General

Brand	DataCard
Model	SR200
Category	Printer
Language	English