DataCard SR200 User Manual

SR200 & SR300 Card Printers and LM200 & LM300 Laminators User’s Guide 41
Icon Status IconColor Meaning
Ready Green Theprinterisreadyandabletostartcard
printing.
Printerisnotfound. Red Theprinterpowerisnotpoweredon,orthehost
PCandprinterarenotconnectedcorrectly.
Initializing Yellow Theprinterisinitializing.Aftertheprinteris
initialized,itgoesintoReadystate.
OfflineMode Yellow Theprinterisinsettingmode
oritisbeing
cleaned.Whentheprocessends,itgoesinto
Readystate.
Preheating Yellow Theheatrollerisheating.Whenitreachesthe
correcttemperature,theprintergoesintoReady
state.
Heating Yellow Theprinterisadjustingtheheatroller
temperature.
CardLoading
CardTransporting
ContactICEncoding
Non‐ContactIC
Encoding
MGEncoding
Printing
Retransfer
Yellow Theprinter
isissuingcards.Theoperatingstatus
duringcardissuingisindicated.Whenthecardis
issued,theprintergoesintoReadystate.
PowerSaving Yellow Theprinterisinpowersavemode.Toendpower
saving,presstheResetkeyontheprinterand
thenpress(Return)toinitializetheprinter.
Error Red Referto“Status
MonitorMessages”onpage 51.

DataCard SR200 Specifications

General

Brand	DataCard
Model	SR200
Category	Printer
Language	English