DataCard SR300

SR200 & SR300 Card Printers and LM200 & LM200 Laminators Installation Guide 53
After Installing the USB Printer Driver
WhentheUSBprinterdriverhasbeeninstalledontoyourPC,youmayperformthefollowing
procedures,assuitableforyourinstallationandprinteruse:
 ContinuewithinstallingtheStatusMonitor.Referto“InstallingtheStatusMonitor”on
page 55.
 Tosetupprintersharing,ref erto“SharingaPrinteronaNetworkConnection”onpage 76.
 AfterinstallingthedriverandStatusMonitor,youcaninstalltheoptionalDatacardSR‐CR
retransferprinterplug‐in.
 Ifyouwanttodeletetheprinter,restartWindowsandthenfollowthestepsin“Removingthe
PrinterDriver”onpage 81.