DataCard SR300

SR200 & SR300 Card Printers and LM200 & LM200 Laminators Installation Guide 1
Chapter 1: Planning the
Installation
Thischapterprovidesinfo rmationaboutthisUser’sGuide.Italso
containsinformationtohelpplantheinstallationofSR200&SR300card
printersandoptionalLM200&LM300laminators.
About This Manual
ThismanualprovidesdetailedinstructionsforinstallngtheSR200&SR300cardprintersandthe
optionalLM200&LM300cardlaminators.
 Chapter 1:"PlanningtheInstallation”—Providesinformationaboutthismanual,aswellas
backgroundinformationneededtoplanforprinterandlaminatorinstallation.
 Chapter 2:"InstallingtheHardwareComponents”—Providesinstructionsforunpackingand
installingthehardwarecomponents,cables,andpowercordsoftheprinterandlaminator.
 Chapter 3:"InstallingtheSmartCardDriver”—Containsproceduresforinstallingthe
appropriatesmartcarddriver.Thisisnecessaryonlyifthecardprinterisequippedwithan
optionalsmartcardupgrade.
 Chapter 4:"InstallingtheUSBPrinterDriver”—ProvidesinstructionsforinstallingtheUSB
printerdriverontothePC(s)usedtocre a teandprintcards.
 Chapter 5:"InstallingtheStatusMonitor”—ProvidesinstructionsforinstallingtheStatus
MonitorontothePC(s)usedtocreateandprintcards.
 Chapter 6:"NetworkInstallation”—Describeshowtoinstallthenetworkprinterdriver,how
toconfiguretheprinterforuseonalocalnetwork,andhowtoshareanetworkedprinter.
 Chapter 7:"RemovingPrinterDriverandStatusMonitor”—Providesinstructionsfor
uninstallingtheprinterdriverorStatusMonitorfromthePC.Instructionsareincludedfor
updatingtheprinterdriverifanewversionisreleased.
Related Documentation
RefertotheDatacardSR200&SR300CardPrintersandLM200&LM300LaminatorsUser’sGuide
forinformationaboutusingtheprinterandlaminatortocreatecards.
RefertotheDatacardSR200&SR300Plug‐inUser’sGuide forinformationaboutusingthecard
printerwithDatacardIDsoftwareapplications.The
manualincludesinstructionsforcreating
magneticstripeen codingconfigurations.