Page 3/27
© 2019 Datalogic S.r.l – All Rights Reserved
INDEX
INTRODUCTION TO THIS USER MANUAL ......................................................................... 4 1.
SETUP OVER PROFINET/IO NETWORK .............................................................................. 5 2.
2.1. CONFIGURING THE LASER MARKER FOR USE OVER PNIO ............................................................ 5
Basic net settings of the Laser Marker ........................................................................... 5
Advanced net settings of the Laser Marker .................................................................... 7
2.2. CONFIGURING THE SIEMENS™ S7-1200 CONTROLLER FOR USE OVER PNIO ............................... 13
Creating a PNIO node using the GSDML file ................................................................. 13
Configuring the Laser Marker PNIO node on TIA Portal ................................................ 15
CYCLIC COMMUNICATION BETWEEN THE PLC AND THE DATALOGIC LASER MARKING 3.
SYSTEM ........................................................................................................................... 16
3.1. INPUT ASSEMBLY MEMORY MAP ........................................................................................ 18
Description of the Input Assembly Memory Map .......................................................... 19
3.2. OUTPUT ASSEMBLY MEMORY MAP ..................................................................................... 20
Description of the Output Assembly Memory Map ....................................................... 21
3.3. POSSIBLE ERRORS .......................................................................................................... 23
Command Error ........................................................................................................... 23
Protocol Error .............................................................................................................. 24
TROUBLESHOOTING ..................................................................................................... 26 4.