Datalogic Arex 420 - Configure Siemens S7-1200 for ProfiNet;IO

Department
TSS L3 LM
Classification
Public
Page 13 18/04/2019
Version
1.0
Date
4/18/2019
Page 13/27
© 2019 Datalogic S.r.l – All Rights Reserved
2.2. Configuring the Siemens™ S7-1200 Controller for use over PNIO
In order to create a Datalogic Laser Marker new ProfiNet/IO node in an already existing
TIA Portal project, it is necessary to install the GSDML file.
Once the new ProfiNet/IO node has been imported inside the project, there are some
parameters which need to be set before starting to work on the data exchange between
the PLC and the Laser Marker.
Creating a PNIO node using the GSDML file
 Select the ‘Manage general station description files (GSD)’ from the Options
Menu.
 Now follow the steps in order to install the GSDML file, indicating the filepath of
the GSDML file on the PC where TIA is running.