Datalogic DS2100N Quick Reference Guide

DS2100N QUICK GUIDE
12
ADVANCED SCANNER CONFIGURATION
For further details on advanced product configuration, refer to the complete Reference Manual on the installation
CD-ROM or downloadable from the web site through this link: www.automation.datalogic.com/ds2100n.
The following are alternative or advanced scanner configuration methods:
HOST MODE PROGRAMMING
The scanner can also be configured from a host computer using the Host Mode programming procedure, by
commands via the serial interface. See the Host Mode Programming file on the CD-ROM.
ADVANCED GENIUS™ CONFIGURATION
The ADVANCED selection available when starting the Genius™ program is addressed to expert users being able
to complete a detailed scanner configuration. By choosing this option it is possible either to start a new scanner
configuration or to open and modify an old one. The desired parameters can be defined in the following window,
similar to the MS Explorer:
Figure 9 - Genius™ Parameter Explorer Window
ALTERNATIVE LAYOUTS
• The ID-NET™ network is a built-in high-speed interface dedicated for high-speed scanner interconnection.
ID-NET™ is in addition to the Main and Auxiliary serial interfaces. If you need to install an ID-NET™ network
refer to the DS2100N Reference Manual.
The scanner can also be configured by reading programming barcodes. See the ID-NET™ Setup Procedure
Using Programming Barcodes printable from the CD-ROM.
• If you need to install a Pass-Through network refer to the DS2100N Reference Manual.
• If you need to install a Multiplexer network refer to the DS2100N Reference Manual.
• If you need to install an RS232 Master/Slave (for backward compatibility) refer to the DS2100N Reference
Manual.

Datalogic DS2100N Specifications

General

Brand	Datalogic
Model	DS2100N
Category	Scanner
Language	English