Datalogic Gryphon GD4200 - I 2 of 5 Check Character Transmission

INTERLEAVED 2 OF 5 (I 2 OF 5) ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE 147
I 2 of 5 Check Character Calculation (continued)
I 2 of 5 Check Character Transmission
Enable this option to transmit the check character along with I 2 of 5 bar code data.
I 2 of 5 Check Character Calculation
= Calculate Bosch Check
$CI2CC10
$CI2CC20
I 2 of 5 Check Character Calculation
= Calculate Italian Post Check
NOTE: This feature is valid only when I 2 of 5 Check Character Calculation
is enabled.
$CI2CT00
I 2 of 5 Check Character Transmission = Don’t Send

I 2 of 5 Check Character Transmission = Send
$CI2CT01