Datalogic Gryphon GM44 Series - Linking the Reader; Link Datalogic RF Devices to Base; Power off

Linking the Reader
16 Gryphon™ I GM44XX
Linking the Reader
Link Datalogic RF Devices to Base
For RF devices, before configuring the interface it is necessary
to link the handheld with the base.
To link the handheld and the base, either press the trigger to
wake it, or simply mount into the base to wake up for opera-
tion. If the reader was previously linked to another base, you
must first scan the
Unlink bar code before re-linking to the new
base.
Power Off
Scan the bar code below to shut off power to the handheld un-
til the next trigger pull.
PowerOff
Unlink