Datalogic Gryphon GM44 Series User Manual

Error Codes
Quick Reference Guide 41
Error Codes
Upon startup, if the reader sounds a long tone, this means the
reader has not passed its automatic Selftest and has entered
FRU (Field Replaceable Unit) isolation mode. If the reader is
reset, the sequence will be repeated. The following table de-
scribes the LED flashes/beep codes associated with an error
found.
Label Programming
Mode Cancel Item
Entry
Cancel label has been
scanned.
N/A
Reader sounds
two times
at low
frequency and
current volume.
Number of
LED Flashes/
Beeps
Error Corrective Action
1 Configuration
Contact Helpdesk
for assistance
2Interface PCB
6 Digital PCB
12 Imager
15 Accelerometer
INDICATION DESCRIPTION LED BEEPER

Datalogic Gryphon GM44 Series Specifications

General

Brand	Datalogic
Model	Gryphon GM44 Series
Category	Barcode Reader
Language	English