Scan Modes
34 Gryphon™ I GM44XX
Pick Mode
Pick Mode is a Decoding and Transmission process where bar
codes that are not within the configurable distance from the
center of the aiming pattern are not acknowledged or trans-
mitted to the host. It is active only while the scanner is in Trig-
ger Single mode. If the scanner switches to a different Read
Mode, Pick Mode is automatically disabled.
Multiple Labels in a Volume
Enables/disables the ability of scanner to decode multiple la-
bels in the same image. Several programming options are
available for this feature, see the PRG for more information.
This feature is not compatible with Multiple Labels Reading
in a Volume. See the PRG for more information.
ENTER/EXIT PROGRAMMING MODE
Pick Mode = Disable
Pick Mode = Enable
To Next Page
Loading...
Need help?
General
