2.4 EXTERNAL MEMORY BACKUP AND RESTORE THROUGH
VISISET™
The "External Memory Backup" or "External Memory Restore" functions allow performing
Complete Configuration and Environmental parameter storage for network and reading
devices. Backup & Restore can be applied to any reader connected through a device having
External Backup Memory, regardless of the reader's network configuration. Backup &
Restore automatically checks whether a previous backup or configuration is already available
for each device, speeding the procedure up and making it more secure.
These functions are supported by VisiSet™ for all reading devices having sw 6.10 and later
when connected to:
CBX + BM100 and/or BM2x0 (sw release 2.02.01 and later)
QL500 (Ethernet TCP/IP) (sw release 2.02.01 and later)
QLM-Series Gateways (reading device sw release 6.50 and later)
Before executing a Backup on a BM100 backup module make sure the Write
Protection switch is set to Unlocked.
If BM100 and BM2x0 are both installed B&R is automatically performed only on
the BM100 module.
BM2x0 can execute B&R only with Network up and running (network cable
connected).
QL500 can backup up to 10 nodes (Master + 9 slaves).
Backup
To perform a Backup:
1. Select "External Memory Backup" from the VisiSet™ Device menu
2. You will be warned that the previous backup will be overwritten. Confirm by clicking Yes.
To Next Page
Loading...
Need help?
General
