Datalogic PowerScan M8300 Readers - Page 17

PowerScan™ M8300 Configuration
Quick Reference Guide 13
END of procedure. YOUR READER IS NOW READY TO READ CODES.
6. Set Radio Address
ÌRF8Î
+
four digits from the Numeric Table for the PowerScan
™
M8300 Address
(from 0000 to 1999).
All readers used in the same area must have different addresses.
7. Set First STAR-System™ Address
ÌRSRÎ
+
four digits from the Numeric Table in the range 0000 to 1999
8. Set Last STAR-System™ Address
ÌRTTÎ
+
four digits from the Numeric Table in the range 0000 to 1999
Whenever the system is composed of a single base station, the first
and last base station addresses (steps 7 and 8) must have the same
value.
9. Exit and Save Configuration
Ì$-?Î