POWERSCAN® PD8530
130
CODE SELECTION (continued)
DESCRIPTION STRING
Composite Code disabled ANA0
enabled ANA1
Discard Linear disabled ANB0
Part enabled ANB1
e = a number from the HEX/Numeric Table
e = a number in the range 0001-3600
READING PARAMETERS
DESCRIPTION STRING
Trigger Mode trigger level BAA0
trigger pulse BAA1
Trigger Type normal trigger BAB0
software trigger BAB1
Flash On Duration BF0f
Flash Off Duration BF1f
Beeper Tone tone 1 GBA1
tone 2 GBA2
tone 3 GBA3
tone 4 GBA4
Beeper Volume off GBB0
low GBB1
medium GBB2
high GBB3
Beeper Duration GBCf
Reads per Cycle one read per cycle BCA0
multiple reads per cycle BCA1
Scan Timeout BEAf
User Defined Beeper Tone tone 1 GBD1
tone 2 GBD2
tone 3 GBD3
tone 4 GBD4
User Defined Beeper Volume off GBE0
low GBE1
medium GBE2
high GBE3
User Defined Beeper Duration GBFf
Perform User Defined Beep
$?GGG
this command carries out its specific function and does not need $+ and $-.
To Next Page
Loading...
Need help?
General
