POWERSCAN® PD8530
16
Install the USB driver on your PC (the first time only) to complete the
connection.
5.
For USB Bulk the relevant files and drivers must be installed from the
CD-ROM. See the “DLBulkUSB User Guide” file provided on the CD-
ROM for more information.
For USB COM the relevant files and drivers must be installed from the
USB Device Installation software which can be downloaded from the web
site http://www.scanning.datalogic.com.
For USB Keyboard and for USB Generic
HID the correct USB driver is
included in the Host Operating System and will either be loaded
automatically or will be suggested by the O.S. and should therefore be
se
lected from the dialog
box.
NOTE
n® PD8530 reader is a USB self-powered device. The PowerSca
NOTE
If you need to change the USB device interface, after having
reconfigured the reader, you have to disconnect and reconnect the
cable to the PC.
To Next Page
Loading...
Need help?
General
