Datalogic QuickScan QBT24 series

Enter/Exit Programming Mode Codabar
146 QuickScan™ I QD24XX/QBT24XX/QM24XX
Codabar Start/Stop Character Set
This option specifies the format of transmitted Codabar start/stop characters
$CCBSC00(CR)
Codabar Check Character Set = ABCD/TN*E
$CCBSC01(CR)
Codabar Check Character Set = ABCD/ABCD
$CCBSC02(CR)
Codabar Check Character Set = abcd/tn*e
$CCBSC03(CR)
Codabar Check Character Set = abcd/abcd
DEFAULT
.
Codabar Start/Stop Character Match
When enabled, this option requires that start and stop characters match
DEFAULT
$CCBSM00(CR)
Codabar Start/Stop Character Match = Don’t Require Match
$CCBSM01(CR)
Codabar Start/Stop Character Match = Require Match
.