FEATURES FOR STAR MODELS ONLY
228 QuickScan™ I QD24XX/QBT24XX/QM24XX
STAR Radio Transmit Mode
Specifies the transmission protocol for Star communications.
Options are:
• ACK from cradle to scanner — signals a good transmission as soon a
s the Base Station
receives a label
• ACK when sent to host — scanner signals a good
transmis
sion as soon as the Base Station
has sent the label to the host
• ACK from host — scanner signals a good transmiss
i
on as soon as the Base Station has sent
the label to the host and host has replied with an acknowledge message.
ACK from cradle
ACK when sent to host
ACK from host
The Base Station can receive a host message only if Host Commands Obey/Ignore
(page 25) is set to Ignore.
ACK from host works only for RS-232 or USB-COM interfaces
with ACK/NACK disabled.
If ACK from host is configured with any other interface conditions, it works like ACK
when sent to host.
See
"Message Formatting"
on page 229 for details.
To Next Page
Loading...
