Datalogic QuickScan QBT2500

PRODUCT REFERENCE GUIDE 87
CONFIGURATION | READING PARAMETERS
SECTION CONTENTS
S
CANNING FEATURES starting on page 88
• Scan Mode
• Scanning Active Time
• Flash On Time
• Flash Off Time
• Double Read Timeout
• Stand /Base Detection Behavior (QuickScan™
QD2500 only)
• Stand Mode/Object Detection Indication (Stand
Mode Flash)
• Stand Mode/Object Detection Sensitivity
• Stand Mode/Object Detection Illumination Off
Time
• Corded Stand Mode
• Dock Detection Beep
LED AND BEEPER INDICATORS starting on page 96
• Power On Alert
• Good Read Beep Type
• Good Read Beep Frequency
• Good Read Beep Length
• Good Read Beeper Volume
• Silent Mode (not available for QW2500)
• Good Read LED Duration
• Good Read: When to Indicate
• Green Spot Duration
• Illuminator Intensity
CAMERA CONTROL starting on page 105
• Aiming Pointer
• Aiming Duration Timer
• Pick Mode
• Mobile Phone Mode
• Mobile Phone Saturation Rate
• Decode Negative Image
• Image Capture
MULTIPLE LABEL READING starting on page 109
• Multiple Labels per Frame
• Multiple Labels Ordering by Code Symbology
• Multiple Labels Ordering by Code Length