Datalogic QuickScan QBT2500

BLUETOOTH-ONLY FEATURES ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE 253
Bluetooth Friendly Name
You can set a meaningful name for QBT2500 that will appear in the application during
device discovery.
To set a new Bluetooth Friendly Name, scan the barcode below and follow the instruc-
tions.
Set Bluetooth Friendly Name
$CBTFN
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar
code at left followed by a maximum 64 digits from
the Alphanumeric characters in Appendix D, Keypad.
The digits must be the hexadecimal ASCII represen-
tation of the desired characters. If less than the
expected string of 32 characters are selected, scan
the ENTER/EXIT bar code to terminate the string.
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
CANCEL

QUICKSCAN QBT2500 [SERIAL_NUMBER_SCANNER]