Datalogic QuickScan QBT2500

UPC/EAN GLOBAL SETTINGS ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE 125
Add-Ons
The following features apply to optional add-ons.
Optional Add-ons
The reader can be enabled to optionally read the following add-ons (supplementals):
• P2
• P5
NOTE: Contact Customer Support for advanced programming of optional
and conditional add-ons.
NOTE: If a UPC/EAN base label and a an add-on are both decoded, the
reader will transmit the base label and add-on. If a UPC/EAN base label is
decoded without an add-on, the base label will be transmitted without an
add-on.
Conditional add-on settings (if enabled) are considered by the reader
before optional add-on settings.
$CADO200

Optional Add-Ons = Disable P2
Optional Add-Ons = Enable P2
$CADO201
$CADO500

Optional Add-Ons = Disable P5
Optional Add-Ons = Enable P5
$CADO501