EasyManua.ls Logo

Datalogic QuickScan QBT2500

Datalogic QuickScan QBT2500
357 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TECHNICAL SPECIFICATIONS
294
QUICKSCAN™ 2500
Table 28 QBT/QM2500 Technical Specifications
ELECTRICAL CHARACTERISTICS
Power Supply
Gun TypeC Port: 5V +/- 5%
Cradle Port: 4.5V to 14V
Consumption
(Typical)
Cradle Only: 45mA @5V (Operating)
Cradle with gun during recharge:
500mA (5V USB Host Power Supply)
1100mA (5V Type-C Host Power Supply)
500mA (12V External Power Supply)
Gun charging through Type-C port:
500mA (USB Type-A Host port, no Scan)
1040mA (Wall Adapter, no Scan)
1040mA (USB Type-C Host port, no Scan)
Reading Indicators
Top illumination, Good Read Spot, Beep
Max. Scan Rate
60 frames/sec
Battery Capacity
Li-Ion 3.6V, 3250mAh (11.7 W/h)
Recharge Time
(Typical)
Gun Only:
- USB Type-A Host to Type-C connector: 5h 30m
- USB Wall Adapter to Type-C connector: 3h
- USB Type-C Host to Type-C connector: 3h
Gun on Cradle:
- USB Type-A Host: 8h
- External 12V Power Supply: 4h
- USB Type-C Host: 4h
OPTICAL CHARACTERISTICS
Optical Format
1/4"
Active Imager Size
3896 um (H) x 2453 um (V)
Active Pixels
1280 H x 800 V
Illumination System
LED source
Red Emission (wavelength - 617 nm)
Aiming System
LED source
Blue Emission (wavelength - 468nm)
Ambient Light Up to
0 - 110,000 lux
Tilt Tolerance
a
a. Based on ISO 15423 specifications
0° - 360°
Pitch Tolerance
a
+/- 65°

Table of Contents

Other manuals for Datalogic QuickScan QBT2500

Related product manuals