EasyManuals Logo

Datalogic Skorpio X3 User Manual

Datalogic Skorpio X3
191 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #132 background imageLoading...
Page #132 background image
6
124
DECODING PARAMETERS
This section contains information about programmable settings for the Skorpio X3™.
Use the Skorpio X3™ Management Utility (FMU), the Scanner Control Panel applet,
the Imaging Control Panel applets to program the Skorpio X3™.
It provides the following information:
Code Parameter is the “human” name for the programming option.
I.D. # is the “decoder” name for the programming option. For example, to set a
Code 39 minimum label length, use I.D. 0120. Programming I.D. numbers given
in this appendix can be used with all programming methods. Note that the
Programming I.D. numbers are provided in hexadecimal notation.
Type tells what kind of setting to use for each code parameter.
On/Off is a toggle. 1 turns the parameter on, and 0 turns it off.
Acceptable Input gives the settings or range of settings for each code
parameter.
Defaults indicates how the parameter is set when the predefined default FF39,
FF3A, or FF3B is selected.
Minimum (FF39) turns every on/off parameter off and sets all minimum and
Maximum Label Lengths to the lowest values.
Maximum (FF3A) turns every on/off parameter on, sets all Minimum Label
Lengths to the lowest values, and sets all Maximum Label Lengths to the highest
values. Use this default for troubleshooting; it provides the best settings for
reading an unknown code symbology and can identify the symbology of scanned
bar codes.
Factory (FF3B) is the factory setting installed on the Skorpio X3™. This default
set will work for most applications. To reset the Skorpio X3™ the original
defaults, scan the Factory bar code
Scanner Type shows, with a checkmark, which modules support the
specified parameter.

Table of Contents

Other manuals for Datalogic Skorpio X3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Datalogic Skorpio X3 and is the answer not in the manual?

Datalogic Skorpio X3 Specifications

General IconGeneral
Display diagonal3.2 \
Display resolution240 x 320 pixels
Display number of colors-
Flash memory0.512 GB
Internal memory0.256 GB
Internal memory typeRAM
Compatible memory cardsmicroSD (TransFlash), microSDHC
Processor familyPXA 310
Processor frequency0.624 GHz
GPS (satellite)No
Operating system installedWindows Embedded CE 6.0
Data networkNot supported
Wi-Fi standards802.11a, 802.11b, 802.11g
Bluetooth version2.0+EDR
Security algorithmsCCX v4
InterfaceUSB 1.1, RS-232, micro USB
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)-10 - 50 °C
Battery capacity3000 mAh
Product colorBlack
Keypad number of keys38
Weight and Dimensions IconWeight and Dimensions
Depth156 mm
Width76 mm
Height193 mm
Weight482 g

Related product manuals