Datalogic Skorpio X3 - Connection to USB Peripherals

1 SKORPIO™ X3
20
3
3.2 CONNECTION TO USB PERIPHERALS
You can connect the Skorpio X3 to a standard 101-key USB keyboard or to a
standard USB flash memory device. Connect the terminal to the Datalogic
94A051971 HandyLink Micro-USB host cable. For all these devices maximum
current withdrawal must be below 100mA.
Key:
A Keyboard with USB interface C 94A051971 HandyLink Micro-USB Host
Cable
B Skorpio X3
Key:
A USB hard drive/ external
memory source
C 94A051971 HandyLink Micro USB Host
Cable
B Skorpio X3
D Standard A to Micro A USB Cable


A standard USB cable is needed only if the USB hard driver or flash memory device does not
include its own cable with a "A" plug on it
A
B
C
A
B
C
D