USE AND FUNCTIONING
73
4
4.7.2 Bluetooth Manager Device Setup
NOTE
The Bluetooth® Manager icon will only be visible if Bluetooth®
hardware has been installed on the unit.
Using the Skorpio X3 to connect to another device
To create a Bluetooth® pairing between your device and another device that has
Bluetooth® capabilities, ensure that the two devices are turned on, discoverable, and
within close range.
1. Open the Bluetooth® control panel by tapping Start > Settings > System >
Bluetooth Manager:
2. Search for available Bluetooth® devices by tapping the button for the type of
device you want (Printer, Serial or All) or tap Discovery > Discover to skip this
step. The Skorpio X3 will search for Bluetooth® devices within range.
NOTE
If you attempt to set up a connection when the Bluetooth® radio is
disabled, you will receive a message reminding you that the radio is
turned off, and asking if you want to turn it on. Tap Yes if you need to
enable the Bluetooth® radio.
To Next Page
Loading...
