Datalogic Skorpio X3 User Manual

USE AND FUNCTIONING
43
4
4.5 STATUS INDICATORS
4.5.1 LED Status
The Skorpio X3 provides three different LEDs signaling the mobile computer status.
LED STATUS
Good Read

(right side)
Red
Scanning LED is ON from the time the
user hits the scan button (Trigger) until
the bar code is decoded (laser models)
Time-out (imager models).
Green
Scanning LED is ON, showing a good
decode.
Charging Status
(left side)
Green
It is solid once the charging process has
been completed (full charge).
Red It is solid while charging.
Blinking Red It blinks in case of charge fault.
Blinking Amber
It blinks when the device raises a
notification to the user.
Keyboard Status
(center)
Off Keyboard in primary.
Solid Yellow Yellow alternate key mode.
Solid Blue Blue alternate key mode
Pink CapsLock enabled.

The Good Read LED has also a "Suspend LED" feature. The decode LED will glow red when
the device begins to suspend, and will turn off when the suspend completes successfully

Datalogic Skorpio X3 Specifications

General

Display diagonal	3.2 \
Display resolution	240 x 320 pixels
Display number of colors	-
Flash memory	0.512 GB
Internal memory	0.256 GB
Internal memory type	RAM
Compatible memory cards	microSD (TransFlash), microSDHC
Processor family	PXA 310
Processor frequency	0.624 GHz
GPS (satellite)	No
Operating system installed	Windows Embedded CE 6.0
Data network	Not supported
Wi-Fi standards	802.11a, 802.11b, 802.11g
Bluetooth version	2.0+EDR
Security algorithms	CCX v4
Interface	USB 1.1, RS-232, micro USB
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	-10 - 50 °C
Battery capacity	3000 mAh
Product color	Black
Keypad number of keys	38

Weight and Dimensions

Depth	156 mm
Width	76 mm
Height	193 mm
Weight	482 g