133
European Article Numbering-13 (EAN-13)
Defaults
Scanner
Type
Code
Parameter
Description
I.D.#
Accept.
Input
Min
Max
Factory
Laser
2D Imager
Enter 1 for On and 0 for Off
Enable
Enables/disables the EAN-
13 symbology.
0510 On or Off Off On On √ √
Enable
Aggressive
Decoding
Enables more aggressive
decoding algorithms to be
used in order to scan hard
to read labels.
0511 On or Off Off On Off √ √
Send
Check Digit
Includes a check digit in
the label which is
transmitted.
0512 On or Off Off On Off √ √
Send System
Digit
This instructs the decoder
to include the system digit
in the label transmission.
For UPC-E, the system
digit is zero.
0513 On or Off Off On On √ √
Convert EAN-
13 to ISBN
This instructs the decoder
to identify ISBN labels and
append the check digit (per
ISBN guidelines) to the
end of the label.
0514 On or Off Off Off Off √ √
Convert EAN-
13 to ISSN
This instructs the decoder
to identify ISSN labels and
append the check digit (per
ISSN guidelines) to the
end of the label.
0515 On or Off Off Off Off √ √
Enable EAN 4-
Digit Price/
Weight Check
Digit
Requires the use of a 4-
digit price/ weight check
digit to verify a bar code.
0516 On or Off Off Off Off √
Enable EAN 5-
Digit Price/
Weight Check
Digit
Requires the use of a 5-
digit price/ weight check
digit to verify a bar code.
0517 On or Off Off Off Off √
Read
Verification
Sets the number of times a
label must be read before
it is transmitted.
0524 01 - 04 01 02 01 √
User ID
Specifies the symbology
identifier (if any) that is
sent by the decoder when
parameter Send Code ID
(Index 0025) is set to 3.
ASCII code zero (null) is
used to indicate that an
identifier is not to be sent
for the symbology.
0525
Any
single
ASCII
character
(00 = Off)
‘M’ ‘M’ ‘M’ √ √