Datalogic Skorpio X3 - Page 151

143
GS1 DataBar-14
Defaults
Scanner
Type
Code Parameter
Description
I.D.#
Accept.
Input
Min
Max
Factory
Laser
2D Imager
Enter 1 for On and 0 for Off
Enable
Enables/ disables the GS1
DataBar -14 symbology.
0800 On or Off Off On On √ √
Convert to
GS1-128
Instructs the decoder to
transmit the label data as
one or more GS1-128
labels.
0804 On or Off Off On Off √ √
NOTE
If GS1 DataBar-14, GS1 DataBar Expanded, GS1 DataBar Limited, or GS1 DataBar
Composite symbologies are enabled for GS1-128, then that setting is also enabled for all
other GS1 DataBar symbologies.
For the 2D Imager, GS1 DataBar Expanded’s User ID is used for GS1 DataBar-14.