27
4. Press the DOWN button to reset the week count to zero.
5. Press the SCROLL button to conrm and move to the next eld.
7.7.3 Conguring A Maintenance Timer
Follow these steps to modify the total number of weeks or the number of elapsed weeks for a given
maintenance timer:
1. Select the MAINT TIMERS submenu.
2. Select the desired maintenance timer using the UP and DOWN buttons.
3. Press the SCROLL button once to view the maintenance timer options.
4. Press the UP button once to begin timer conguration. The Total Weeks eld begins to ash.
5. Use the UP and DOWN buttons to adjust the selected eld as required. Hold down either button for
automatic key press repeat.
6. Press the SCROLL button to conrm the current setting and move to the next eld.
7. Repeat steps 5 and 6 to set the number of weeks already elapsed. Generally you will want to leave
this eld at 0 - the start of the timed period.
8. Press the SCROLL button once to return to the maintenance timer submenu.
7.7.4 Disabling A Maintenance Timer
If you want to disable a maintenance timer follow the procedure outlined above until you reach step 5.
At this point press the DOWN button until the Total Weeks eld is 0. Press the SCROLL button once to
save the new setting and return to the maintenance timer options view. This will completely disable the
maintenance timer.
Notes:
1. Lowest numbered timers have the highest priority and will be shown rst if two or more timers are
due at the same time. Clearing the rst maintenance timer will result in the controller notifying you
that next highest priority timer is due.
2. The maintenance timers will not accumulate time while the controller is turned off.
To Next Page
Loading...
Need help?
General
