Notch On/Off
Turns the notch filters on and off.
Frequency (1 to 6) 20 to 20K
Selects the desired notch filter frequency of the selected notch filter.
Q 16 to 128
Selects the Q of the selected notch filter.
Level -36 to 6 dB
Sets the level of the selected notch filter. Set to +6dB to help find unwanted feedback, then set
to -3dB to -36dB to remove.
The ZonePro™ also offers a dedicated compression module. The Compressor is the perfect tool
for tightening uneven signal sources such as vocals and guitars. The parameters for the
Compressor are as follows.
4.5 - Compressor (Insert and DYN Module)
Detailed Parameters
Section 4
ZonePro
™
ZonePro
™
User Manual
21
To Next Page
Loading...
