DCS Elgar Plus User Manual

© dCS Ltd. 1999 - 2004 Price UK £17.50 / Euro 25.00
All rights reserved. No part of this publication may be reproduced, stored in or
introduced into a retrieval system, or transmitted in any form, or by any means
(electronic, mechanical, photocopying, recording or otherwise) without the prior
written permission of dCS
1
. Any person who does any unauthorised act in
relation to this publication may be liable to criminal prosecution and civil claims
for damages.
Information contained in this manual is subject to change without notice, and
whilst it is checked for accuracy, no liabilities can be accepted for errors.
1
dCS is Data Conversion Systems Ltd. Company registered in England No. 2072115.
dCS Elgar Plus
Stereo Digital to Analogue Converter
User Manual
Software Release 4.4x
August 2005

DCS Elgar Plus Specifications

General

Functions	Media Conversion
Fiber Ports	1
RJ45 Ports	1
Data Rate	10/100/1000 Mbps
Fiber Connector	SC
Fiber Mode	Single Mode
Interface	Ethernet
Fiber Type	Single Mode
Wavelength	1310 nm
Operating Temperature	0°C to 50°C
Humidity	5% to 90% (Non-condensing)

Summary

PRODUCT OVERVIEW

STEP-BY-STEP GUIDE

Preliminaries

Provides initial setup advice, cable connections, and basic operation steps.

TYPICAL APPLICATIONS

THE SOFTWARE – THE MENU

Function Menu Navigation

Explains how to open, navigate, and close the Function Menu.

Menu Sequence and Filter Selection

Master/Slave Operation

Mute and Fade Settings

Dual AES Mode Configuration

Display, Balance, and Volume Settings

Timeout and PLL Settings

Software Update By CD

Guides for updating software via CD.

Factory Reset and Sync Options

THE HARDWARE – CONTROLS AND CONNECTORS

Front Panel Controls

Description of front panel buttons, indicators, and rotary control.

Rear Panel Connectors

Details all input/output ports, switches, and connectors on the rear panel.

ELGAR PLUS TECHNICAL INFORMATION

Digital Interface Specifications

Details AES/EBU, SPDIF, IEEE 1394 interfaces.

Analogue Outputs and Clocking

USING YOUR dCS ELGAR PLUS FOR THE FIRST TIME

Initial Setup Procedures

Covers box contents, safety, voltage, and placement.

Safety and Troubleshooting

Fault Indication and Power Issues

Audio and Connectivity Troubleshooting

Addresses audio output problems, channel swaps, and connection issues.

Remote Control and Update Issues