dCS Rossini CD / Network Player User Manual Software Issue 1.0x
February 2016
Rossini Player Manual v1_0x Page 30 English version
Renaming your Rossini
To identify more than one Rossini unit on the same network, you can change the network name of
each Rossini Player or DAC as follows.
• Connect a PC, tablet or phone and the Rossini to the same network.
• Press the Rossini’s Menu button 3 times, note the IP address of the unit, press the Power button
briefly to close the menu page.
• Open a web browser and go to the Rossini’s IP address.
• Click or tap Device Settings.
• Click or tap the box under Device Name, enter the new name and click or tap Submit.
This feature will be available from the Rossini app soon.
Power Link
Connecting the Player’s RS232 port to the Rossini Clock’s
RS232 Loop port allows both units to be set to sleep / wake /
off by pressing the Player’s Power button, or by one remote
control command.
A screened cable fitted with two 9-way female D-type
connectors wired pin-to-pin is required.
The Power Link feature will only work if both units are set to the same RS232 mode
(Text or Binary).
From completely off (not Sleep), if you switch the Clock on first, the units will be
automatically set to the same mode.
To Next Page
Loading...