dCS Rossini CD / Network Player User Manual Software Issue 1.0x
February 2016
Rossini Player Manual v1_0x Page 33 English version
Display – DAC Mode
With one of the digital inputs selected or if the Network input is selected but is not active, the display is
again split into 4 areas:
----------1----------- ----2-----
---------3--------- --------------4--------------
Area 1: The selected input.
Area 2: The data rate - word length and sample rate for PCM or DSD or DSDx2.
Area 3: The status icons are displayed here, these are the same as for the Network input except for:
Wrong clock detected
Area 4: The Volume control taper and the current Volume setting in numbers.
Details of the menu displays are shown in the Menu section on page
X39X.
All LCD displays suffer from staining if they are left for long periods displaying the same
image. To avoid unnecessary display wear, we recommend switching off or setting the
unit to Sleep mode at the end of the listening session.
Remote Control Receiver
If you are using an IR remote control, aim the handset towards the receiver (B) for best sensitivity.
8BCD Tray
When loading a CD into the tray (C), ensure the disc is central with the label upwards and is seated
correctly. The tray will close if you press the Stop/Eject button or press the Play button or gently push
it in a little. Let the tray close by itself, do not force it in.
The CD mechanism controls are disabled when the unit is not in CD mode. Please
remove the disc and close the tray before changing from CD mode to DAC mode.
To Next Page
Loading...