Removing and Replacing FRUs 39
Handling a CRT
• Never handle the CRT by the neck. Always use two hands and hold
the CRT by the sides near its face.
• Keep the CRT away from your body during handling.
• Do not let the neck strike anything.
• Do not rest the CRT on its neck.
• Do not let the CRT touch any tools, such as screwdrivers and soldering
irons.
Stocking and Storage
All CRTs must be kept in a closed container or mounted on the device
cabinetry.
CRT Disposal
Use the following procedure to safely dispose of CRTs. Always perform
this procedure at a Digital facility.
WARNING
Do not dispose of any CRT until it is rendered inoperative and
safe to dispose.
Never perform the following disposal procedure at the customer
site. Return the defective CRT to the local Digital facility for
disposal.
At the Digital facility you will need
• An area clear of nonessential personnel
• A second person in the area in case of an emergency
• Safety goggles (PN 29-16141)
• Gloves (PN 29-16146)
• Pliers (PN 19-10008)
WARNING
Be careful when performing this procedure. For your safety, you
must use the specified gloves and goggles.
To Next Page
Loading...