DEC VT420 - Using Set-Up

5
Using Set-Up
5
The VT420 terminal has a series of set-up screens that let you change the
settings of operating features from the keyboard. This chapter provides a
brief summary of how to use set-up. The set-up chapter in Installing and
Using the VT420 Video Terminal describes the set-up screens in detail.
Each set-up screen provides a group of related features, such as
communication or display features. You can move from one set-up screen
to the other to change or review settings.
5.1 Displaying Set-Up Screens
To enter or leave set-up, you press
F3
(
Alt SetUp
. When you enter
set-up, the Set-Up Directory appears (Figure 5–1).
You can select any set-up screen from the Set-Up Directory. Use the
arrow keys to move the cursor to name of the desired screen. Then press
the
Enter
or
Return
key to display that screen.
51