Need help?Do you have a question about the DEEP SEA ELECTRONICS DSE8620 and is the answer not in the manual?
General| Model | DSE8620 |
|---|---|
| Storage Temperature Range | -40 °C to +85 °C |
| Display | LCD |
| Maximum Operating Altitude | 3000 m |
| Programmable Relays | 4 |
| Input Voltage | 9-35V DC |
| DC Supply | 8 V to 35 V Continuous |
| Operating Temperature Range | +70 °C |
| Communication | RS232, RS485 |
| Protection Rating | IP65 |
| Engine Start Modes | Manual, Automatic |
Details module power, voltage, current, inputs, and outputs.
Covers communication ports, usage, and expansion modules.
Describes physical dimensions, mounting, and applicable standards.
Identification and function of all module terminals and connectors.
Typical wiring diagrams for AC topologies and earth systems.
Identifies front panel controls, buttons, LEDs, and display elements.
How to view and interpret engine, generator, and mains data.
Explains push buttons and operating modes like Manual, Auto, Test.
Details for Mains Failure, Engine Running, and Remote Start operations.
Procedures for manual control, test sequences, and generator operation.
Explains alarm types, warnings, shutdowns, and their causes.
Details electrical trips, earth fault, short circuit, and ROCOF protections.
How to configure scheduled start/stop sequences for the generator.
Explains the synchroscope display and synchronisation steps.
Overview of screens for commissioning and load sharing.
Steps to access and modify module parameters via the front panel.
Lists adjustable parameters and their default factory settings.
Guide for diagnosing and resolving common unit and generator faults.
Key steps for successful synchronisation: control, metering, comms, sync checks.
Information on purchasing spare parts and expansion modules.
Guidelines for WEEE and RoHS compliance.
To Next Page
