DEEP SEA ELECTRONICS DSE8620 User Manual

DSE Model 8620 AMF Controller Operators Manual
100
10 COMMISSIONING
10.1 COMMISSIONING SCREENS
Commissioning screens are available to both aid the commissioning process and also to give additional
information about the synchronising and load sharing process.
These screens can be enabled and disabled in the module’s display editor.
10.1.1 SCREEN 1
L – L 0V kW 0.0
Average L-L Voltage and total kW
Amps 0A kVAr 0.0
Load on the set(s) and total kVAr
Pf ----- kW 0.0%
Ramp level and % of full load kW
Gov 0.0% Avr 0.0% Gov and Avr % of Drive
10.1.2 SCREEN 2
Tgt 0.0% kW 0.0%
Target % and total kW
Tgt 0.0% kVAr 0.0%
Target % and total kVAr
Pf ----- Ramp 5.0%
Ramp level and % of full load kW
Gov 0.0% Avr 0.0%
Gov and Avr % of Drive
10.1.3 SCREEN 3
GL1 0A M L1 0A
Generator L1 and Mains L1
Pf ----- Pf ----
Generator Power factor and Mains Power factor
kW 0.0 kW 0.0
Generator kW and Mains kW
kVAr 0.0 kVAr 0.0 Generator kVAr and Mains kW
10.1.4 SCREEN 4
MTgt 0.0% kW 0.0%
Mains Target and mains actual kW
MTgt 00.0% kVAr 0.0%
Mains Target and mains actual kW
Pf ----- Ramp 5.0%
Power factor Ramp rate
Gov 0.0% Avr 0.0% Governor Avr
NOTE:- Some of the items may be removed from the commissioning screens if they are not applicable
to the module configuration.

DEEP SEA ELECTRONICS DSE8620 Specifications

General

Brand	DEEP SEA ELECTRONICS
Model	DSE8620
Category	Controller
Language	English