DSE Model 8620 AMF Controller Operators Manual
58
5.2.2 ENGINE
Contains instrumentation gathered about the engine itself, some of which may be obtained using the
CAN or other electronic engine link.
• Engine Speed
• Oil Pressure
• Coolant Temperature
• Engine Battery Volts
• Engine Run Time
• Engine Fuel Level
• Oil Temperature*
• Coolant Pressure*
• Inlet Temperature*
• Exhaust Temperature*
• Fuel Temperature*
• Turbo Pressure*
• Fuel Pressure*
• Fuel Consumption*
• Fuel Used*
• Fuel Level*
• Auxiliary Sensors (If fitted and configured)
• Engine Maintenance Due (If configured)
• Engine ECU Link*
*When connected to suitably configured and compatible engine ECU. For details of supported engines
see ‘Electronic Engines and DSE wiring’ (DSE Part number 057-004).
• Tier 4 engine information will also be available if used with a Tier 4 suitable engine / ECU.
Depending upon configuration and instrument function, some of the instrumentation items may include a
tick icon beside them. This denotes a further function is available, detailed in the ‘operation’ section
of this document.
Example:
The tick icon denotes that manual fuel pump control is
enabled in this system.
Press and hold to start the fuel transfer pump, release to
stop the pump. This is detailed further in the section entitled
‘operation’ elsewhere in this document.
To Next Page
Loading...
