DSE Model 8620 AMF Controller Operators Manual
65
Network
NetworkNetwork
Network
MAC address
MAC addressMAC address
MAC address
E8.A4.C1.0.A.C2
E8.A4.C1.0.A.C2E8.A4.C1.0.A.C2
E8.A4.C1.0.A.C2
DHCP
DHCPDHCP
DHCP
HOST
HOSTHOST
HOST
DOMAIN
DOMAINDOMAIN
DOMAIN
Vendor
VendorVendor
Vendor
MODBUS over IP
MODBUS over IPMODBUS over IP
MODBUS over IP
TCP Port 502
TCP Port 502TCP Port 502
TCP Port 502
Pref IP 0.0.0.0
Pref IP 0.0.0.0Pref IP 0.0.0.0
Pref IP 0.0.0.0
Pages available in the “ABOUT” screen to confirm Network settings.
Data Logging Pages
The DSE data logging pages show information depending on the configuration in the module.
Data Logging
Log to internal memory
Logging active
No USB drive present
Inserting a USB drive to the host USB will display the following change to the page.
Data Logging
Log to USB drive
Logging active
Do not remove USB drive
NOTE:- Removal of the USB drive should only be carried out using the following method.
Press and hold the tick button until “Ok to remove USB drive” is displayed.
Data Logging
Log to USB drive
Logging active
Ok to remove USB drive
It is now safe to remove the USB drive.
This ensures the logging data file will save to memory complete and will not become corrupt.
Press down
to view the next page.
Data Logging
Unique setting for each module
Location of stored data.
Internal module memory or external
If data logging is active or inactive
Remaining time available for logging
information.
To Next Page
Loading...
