Need help?Do you have a question about the Deif XDi Series and is the answer not in the manual?
General| Accuracy | ±0.1% of reading ±1 digit |
|---|---|
| Protection | IP65 (front) |
| Input | Voltage, Current, Temperature |
| Output | Analog output, Relay output, Digital output |
| Display | LCD |
| Frequency Range | 45 to 65 Hz |
| Communication | Modbus RTU, Profibus DP |
Explains the structure and types of virtual indicators and libraries.
Details the various methods for inputting data into the XDi indicator system.
Outlines the XDi's wizard and menu system operation.
Provides instructions and cut-out dimensions for panel mounting the XDi unit.
Covers CAN bus ports, wiring, termination, and cable recommendations.
Guides the user through the initial setup wizard for the XDi unit.
Details the step-by-step procedure for manually configuring the XDi unit.
Explains the standard CAN bus ports and XDi-net for data sharing.
Describes how to extend XDi functionality with analogue, digital, or NMEA modules.
Details the AX1 module's analogue inputs, configurations, and connections.
Explains NMEA interface modules for receiving and transmitting NMEA data.
Describes basic functions accessible via short pushes on the XDi's front buttons.
Provides access to user-configurable settings like dimmer, warnings, and sound.
Explains access to advanced menus via long double pushes on the XDi's front buttons.
Details the secure procedure to access the XDi's installation menu.
Allows editing of elements like headlines, labels, and units within a virtual indicator.
Covers adjusting parameters for analogue, digital, and CAN inputs for indicators.
Explains how to configure COM ports, NMEA talker IDs, and input/output settings.
To Next Page
