DESIGNER’S HANDBOOK 4189350049C EN Page 175 of 206
Before you make changes in the CAN bus setup, it is recommended to read relevant parts of the
XDi-net/CANopen reference manual.
11.16 Service menu
The service menu consists of two pages, containing product information and setup status that may be quite
important to have on hand in case DEIF is contacted in relation with service or support.
11.16.1 NMEA monitor
XDi has a built-in monitor function that can present all NMEA sentences received (RX) from devices connected to
one of the NMEA inputs on an NX2 module.
The monitor will also present NMEA sentences sent out (TX) on one or more of the NMEA outputs.
To Next Page
Loading...
Need help?
General
