Deif XDi Series User Manual

DESIGNER’S HANDBOOK 4189350049C EN Page 197 of 206
13.3.2.1 Normal analogue azimuth, RPM and Pitch
XDi
device
Selected
azimuth
indicator
CAN TX
azimuth angle
Control sys.
RPM/%RPM *
Control sys.
Pitch/%Pitch *
Select
VS profile
Actual
Set
point
Actual
Set
point
Actual
Set point
XDi 1
VI013 to 020
4-20 mA
4-20 mA
4-20 mA
XDi-net
4-20 mA
XDi-net
VS05
XDi 2
VI013 to 020
XDi-net
**
XDi-net
**
XDi-net
**
4-20 mA
***
XDi-net
**
4-20 mA
***
VS08
(VS01***)
XDi 3
VI013 to 020
XDi-net
XDi-net
XDi-net
XDi-net
XDi-net
XDi-net
VS01
*) The analogue RPM input can calculate %RPM based on actual RPM, and analogue pitch input is scaled to a
%Pitch value. (From the installation menu, an analogue pitch angle input can be scaled to %Pitch for indication). All
analogue data is default shared via the XDi-net.
**) You can disable the TPDO input in VS02 to make it only listen on XDi-net (it will function with TPDO active).
***) An AX1 module is needed on the XDi 2 to get the RPM and pitch set point. If the RPM and pitch set point
presentation is not used, then VS02 must be used for the XDi 2.
13.3.2.2 SIN/COS azimuth and normal analogue RPM and Pitch
XDi
device
Selected
azimuth
indicator
CAN TX
azimuth angle *
Control sys.
RPM/%RPM *
Control sys.
Pitch/%Pitch
Select
VS profile
Actual
Set
point*
Actual
Set
point
Actual
Set
point
XDi 1
VI013 to 020
sin cos
0 to 10
V *
4-20 mA
XDi-net
4-20 mA
XDi-net
VS06
XDi 2
VI013 to 020
XDi-net
**
XDi-net
**
XDi-net
**
4-20 mA
***
XDi-
net**
4-20 mA
***
VS08
(VS01***)
XDi 3
VI013 to 020
XDi-net
XDi-net
XDi-net
XDi-net
XDi-net
XDi-net
VS01
*) sin cos requires two analogue inputs, and therefore voltage input 3 (dimmer) on the second AX1 module (slot 2)
is used as azimuth set point input. (Voltage input 3 (dimmer) on AX1 in slot 1 is always reserved for dimmer in the
DEIF standard libraries).
**) You can disable the TPDO input in VS02 to make it only listen on XDi-net (it will function with TPDO active).
***) An AX1 module is needed on the XDi 2 to get the RPM and pitch set point. If the RPM and pitch set point
presentation is not used, then VS01 must be used for the XDi 2.

Deif XDi Series Specifications

General

Brand	Deif
Model	XDi Series
Category	Measuring Instruments
Language	English