7 User Interface 38
O.K. and return to Setup. A check appears in the check box to indicate that the code
has been activated.
Activating the general code has various effects on furnace operation. In particular, note
the following items:
• Please record the code number since it cannot be later determined.
• Programs protected by the general code are marked with a lock displayed next to
• Programs protected by the general code cannot be edited or modified (Program
• Programs protected by the general code cannot be deleted (Program Manager).
• Program numbers protected by the general code are not available as targets for
• When the general code is activated, only the following functions are available in
Set display contrast
ograms
• In particular, it is not possible to calibrate the temperature.
If you wish to perform a function that cannot be performed while the general code is
creen saver
er makes the screen go dark after the furnace has not been used for a
the program number.
Editor cannot be invoked for these programs)..
copying (Program Manager)..
Setup:
General code
Check program
Diagnostic data
Leak test
Print all pr
activated, you must first deactivate the code. In order to deactivate the general code,
select this menu item in Setup, and enter the (correct) code (confirm with "ENTER").
S
The screen sav
while, and thereby protects the display (less power consumption and longer screen life).
Press any button to for the original display to appear. Press ↓ and ↑ to switch
between activating and deactivating the screen saver. The current setting has a bright
background. The wait period for the screen to go dark if no button is pressed can be set
after pressing "ENTER". Enter the different wait period (range of 1 – 99 min.) on the
alphanumeric keypad or press "+" or "-" , and then press "ENTER". Press O.K. to
accept the wait period and return to Setup. Press Cancel to return to Setup
without saving changes.
Service functions
e password-protected and are only available to authorized service Service functions ar
personnel.
DEKEMA Dental-Keramiköfen GmbH, AUSTROMAT
®
D4, Version 3, 2006
To Next Page
Loading...
