Dekema Austromat D4 - Program Management and Editing

7 User Interface 23
MAT
®
D4, Version 3, 2006
Figure 14
Only a complete firing program can be
The program number under which the
background. If you wish to select a different
saved (program name + program procedure).
program will be stored is displayed on a light
memory, you can enter the number directly
anumeric keypad or with the aid of the control keys "+" and "--" or use ↑ via the alph
or ↓ to browse through the memory slots. Press O.K. to store the program and
access the Program Display automatically.
In order to reverse this example, please proceed as follows. In the Program Display
menu, press Program Manager , then select program number 200 (light background)
and press Delete . Answer the security query concerning the deletion by pressing
yes . You are now back in the Program Manager menu.
7.2 PROGRA
and to manage the individual
AUSTROMAT D4
ts (program numbers) for firing programs. Memories 001 – 100
rograms (Section 7.1.2) (depending on software version), and
M MANAGER
The Program Manager is used to select a firing program
memories (copying, deleting firing programs). Altogether, the
offers 200 memory slo
are reserved for set p
memories 101 – 200 are reserved for individual programs (Section 7.1.3). In the set
programs, the firing procedure is pre-defined, and only certain parameters may be
modified. Specifically, you may not delete nor overwrite a set program. It is only
possible to change the allocation of these memory slots by updating the set programs
with a software module. Individual programs, on the other hand, can be freely
managed in the reserved memory area.
In the Program Manager (Fig. 15), you can select from the following functions (function
bar):
Abbildung 15
O.K. Cancel
SAVE AS
Set programs X Y 001-100
individual programs 101-200
191 ..............................................
192 ..............................................
193 ..............................................
194 ..............................................
195 ..............................................
196 ..............................................
197 ..............................................
198 ..............................................
199 ..............................................
200 WASH FIRING TEST
O.K. Copy Delete Cancel
PROGRAM MANAGER
001-100
s 101-200
...............................
...............................
098 ..............................................
099 ..............................................
set programs XY
indivdual program
096 ...............
097 ...............
100 ..............................................
101 INDIVIDUAL ..............................000
102 INDIVIDUAL ..............................001
103 ..............................................
104 ..............................................
105 ..............................................
DEKEMA Dental-Keramiköfen GmbH, AUSTRO